Products
Product Center
Inconel601
Classification:
- Product Description
-
Material designation: Inconel601 nickel-based alloy
American grade: UNSN06601
German grade: 2.4851
Overview of inconel601(n06601) nickel-base alloy
Inconel601(unsn06601) nickel-based alloys and Inconel601(unsn06601) nickel-based alloys with a chromium content of 21.0-25.0% and a nickel content of about 72% have strong oxidation resistance, high temperature resistance and corrosion resistance. It also has high mechanical properties at high temperatures. Inconel601(unsn06601) nickel-based alloys have high high temperature strength, excellent oxidation resistance, anti-carburization and sulfur resistance. Especially in the environment of rapid temperature change and repeated oxidation, it has excellent peeling resistance. Therefore, it is widely used in various heat treatment furnace components, diesel car glow plug components, etc.
Chemical composition of inconel601(n06601) nickel-base alloy
C≤ Si≤ Mn≤ P≤ S≤ Cr≥ Ni≥ Mo≥ With 0.10 0.50 1.00 0.020 0.015 21.0-25.0 72.0 1.00 Other N≤ Al≤ Ti≤ Fe≤ Co≤ V≤ W≤ Nb≤ 1.00-1.70 Allowance Physical Properties of inconel601 (N06601) Nickel Base Alloy (Annealed)
Inconel601(unsn06601) nickel-based alloy density: 8.42g/cm3(g/cm³).
The elastic modulus of inconel601(unsn06601) nickel-base alloy is 124.7-206.5gpa.
Inconel601(unsn06601) nickel-based alloy gold melting point: 1360-1411 C.
The thermal expansion coefficient of inconel601(unsn06601) nickel-base alloy (20~100 ℃) is 13.75 μM/M ℃.
In601 (EN601) based alloy.
Mechanical properties of inconel601(n06601) nickel-based alloy
Tensile strength (MPA):RM n/mm² ≥ 550.
Yield strength (MPA):rp0.2n/mm²≥ 205.
Elongation: a5%≥ 30.
Processing heat treatment of inconel601(n06601) nickel-base alloy
Inconel601(unsn06601) nickel-base alloys are not precipitation-hardening alloys, they cannot be age-hardened by heat treatment. When the temperature reaches 900 ℃ after cold working, the material will soften. If the material requires high temperature strength, it is recommended to carry out solution heat treatment at 1100~1200 ℃. At this time, the cooling method is water cooling, and air cooling can also be used according to the thickness of the plate. However, in order to avoid carbide precipitation, it is recommended to cool as soon as possible in the range of 500~800 ℃.
Machinability of inconel601(n06601) nickel-base alloy
Inconel601(unsn06601) nickel-base alloys are easy to hot work. The heating temperature is 1150~1200 ℃, and the hot working temperature is 1050~1200 ℃. Simple processing is possible below 850°C. Cracking will occur in the temperature range of 650~850 ℃, please avoid this temperature range during processing. In order to avoid carbide precipitation, it is recommended to increase the cooling rate in the range of 500~800 ℃. 601 alloys have excellent cold workability and can be processed into SUS310S and 800 alloys.
inconel601(n06601) nickel-base alloy varieties, specifications and supply
1 variety classification: Danyang Xinmao alloy can produce various specifications of inconel601 seamless pipes, inconel601 steel plates, inconel601 round steel, inconel601 forgings, inconel601 flanges, inconel601 rings, inconel601 welded pipes, inconel601 steel strips, inconel601 welding wires and supporting welding materials.
2 Delivery status: seamless steel pipe: solution + acid white, length can be fixed; Plate: solid solution, pickling, trimming; Welded pipe: solid solution acid white + RT% flaw detection, forging: annealing + turning; Bar forging, surface polishing or turning polishing; Cold rolling of strip steel, softening of solution and descaling; Wire solution delivery pickling plate or straight strip, solid solution straight strip fine polishing state.
Key words:
Inconel601
Product inquiry
Related Products
