language
Products
Product Center
The disc spring is a conical disc and can be used alone or in series or parallel. Undertake dynamic load along the upper or lower edge. When compressed, it deforms until it flattens. It can be used as a live load in the form of stored energy, automatically converted to the additional compression load required for sealing when necessary, supplementing the continuous requirements of gaskets and packing, maintaining the rated load, and reducing unnecessary downtime and leakage losses.
Inconel600 is an early developed Ni-Cr-Fe-based solid solution strengthened alloy. It has good high temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding process performance. It has good hot strength and high plasticity below 700 ℃. The alloy may be strengthened by cold working or joined by resistance welding, solution welding or brazing. It can be used for cold-rolled sheet, hot-rolled thick plate, strip, wire, bar, round cake, ring billet, ring forging, etc. It is suitable for manufacturing anti-oxidation parts with low load below 1100 ℃.
Inconel601(unsn06601) nickel-based alloys and Inconel601(unsn06601) nickel-based alloys with a chromium content of 21.0-25.0% and a nickel content of about 72% have strong oxidation resistance, high temperature resistance and corrosion resistance. It also has high mechanical properties at high temperatures. Inconel601(unsn06601) nickel-based alloys have high high temperature strength, excellent oxidation resistance, anti-carburization and sulfur resistance. Especially in the environment of rapid temperature change and repeated oxidation, it has excellent peeling resistance. Therefore, it is widely used in various heat treatment furnace components, diesel car glow plug components, etc.
Inconel625 is a solid solution strengthened nickel-based superalloy with molybdenum and niobium as the main strengthening elements. Excellent corrosion resistance and oxidation resistance. Low temperature to 980 ℃ has good tensile and fatigue properties, resistance to stress corrosion in salt spray environment. Therefore, it can be widely used in the manufacture of aero-engine parts, aerospace structural parts and chemical equipment. The alloy has good processing performance and welding performance, and can supply various plates, bars, pipes, wires, strips and forgings.
Inconel718 alloy is a nickel-based high-temperature alloy with body-centered tetragonal phase γ′ and FCC γ′ phase precipitation strengthening. It has good comprehensive performance in the range of -253 ℃ ~ 700 ℃. The yield strength below 650 ℃ is the first in the deformation of high-temperature alloys, with good fatigue resistance, radiation resistance, oxidation resistance and corrosion resistance, good workability, weldability and long-term structural stability, can be manufactured in a variety of shapes of complex parts, in the aerospace, nuclear energy, petroleum industry, petroleum industry and other fields have a wide range of applications in the above temperature range has been widely used.
Inconelx-750 alloy is mainly a kind of nickel base superalloy aged by γ′[Ni3(al,Ti,Nb)] phase. It has good corrosion resistance and oxidation resistance below 980 ℃, high strength below 800 ℃, good relaxation resistance below 540 ℃, good formability and weldability. The alloy is mainly used in the manufacture of high-strength, corrosion-resistant ring parts, structural parts and bolts, medium and low stress, anti-relaxation plane springs and coil springs working below 540 ℃. It can also be used to manufacture turbine blades and other parts. Products include plates, strips, bars, forgings, rings, wires, pipes, etc.
The disc spring is a conical disc and can be used alone or in series or parallel. Undertake dynamic load along the upper or lower edge. When compressed, it deforms until it flattens. It can be used as a live load in the form of stored energy, automatically converted to the additional compression load required for sealing when necessary, supplementing the continuous requirements of gaskets and packing, maintaining the rated load, and reducing unnecessary downtime and leakage losses.
Incoloy825(n08825,2.4858) alloy is a fully austenitic Ni-Fe-Cr alloy stabilized with Ti and added Cu and Mo.
The alloy has high chromium content and sufficient nickel content, so it has high temperature corrosion resistance and is widely used in industry. In chloride, low concentration NaOH aqueous solution and high temperature and high pressure water, it has excellent stress corrosion cracking resistance, so it is used to manufacture equipment resistant to stress corrosion cracking. Corrosion resistance is better than the general austenitic stainless steel, but also better than the Inconel 600 alloy; in the manufacture of corrosion resistance stress cracking equipment, but also better than the Inconel 600 and Monel400 alloy.
The alloy has good comprehensive properties in the range of -253~700 ℃. The yield strength below 650 ℃ is the same as that of the deformed high temperature alloy. It has good fatigue resistance, radiation resistance, oxidation resistance, corrosion resistance, good processing performance and welding performance. In the above temperature range, it is widely used in nuclear power, petroleum industry, extrusion die and other fields.
Anti-oxidation temperature 600~700 ℃. It can be used as high temperature and high pressure valve body and burner. The temperature range of gas turbine compressor blades is 700~800 ℃. The gas turbine compressor blade temperature is below 900 ℃. Chromium as a high temperature part of the boiler. Chromium has certain oxidation resistance and high temperature strength in the range of 600~700 ℃. It is suitable for high temperature parts such as steam turbine blades, nozzles, boiler burner valves, etc. The oxidation temperature is 700~800 ℃, which is the same as 1cr12 steel. The oxidation temperature is below 870°C.